Size: dia 90*62mmh
Mold No.: OR0677A-01
Structure: 3-pieces-can structure. Flat lid. Lid could with emboss or without emboss.
Mold No.: OD0844A-01
Structure: 2-pieces-can structure. Outside roll line.Lid could be with emboss or without emboss.
Mold No.: DR0962A-01
Structure: Flower-Shaped Tin Can .3-pieces-can structure. Flat cover with inner coil
Structure: Body has three layers, with a flat lid inside the rolled line.
Structure: 2-pieces-can . Lentil-shaped.
Mold No.: ER0569A-01
Structure: Flat closed plug and is inclined. Body and lid could be with embossment or without embossment.
Mold No.: ED1255A-01
Structure: two pieces tin. Lid and bottom are punched from one piece tinplate with rolled hinge on back side and dots on front side. When opening the box, it will have click sound. Embossment can be applied on the tin box.
Mold No.: ED1522A-01
Structure: Two pieces tin. Embossment can be applied on the tin box.
Mold No.: ED2094A-01
Structure: Flat lid cover the edge to the bottom. Slide open the lid.
Mold No.: ER0776A-01
Structure: Flat closed plug lid with pin hinge. Body and lid could be with embossment or without embossment. Bottom could be sealed or rolled.
Mold No.: DR0144A-01
Structure: three-piece tin box. Lid is punched from one piece tinplate, and body is connected by two pieces tinplate, irregular shaped tin box.